Surface GripTreat Anti-Slip Floor Safety Treatment
$36.00 – $83.00
FREE SHIPPING! FOR ALL ORDERS IN CONTINENTAL USA
Are you a contractor? Contact us for a special offer
- Additional information
Clear Anti Slip Chemical Treatment for Slippery When Wet Surfaces.
Surface GripTreat is a water-based anti-slip solution specifically developed to treat the surface of ceramic and porcelain tile, concrete and other hard mineral surfaces. It contains inorganic surface activators and polymers that react to form a transparent, anti-slip micro-structure, that does not change the appearance of the treated surface. For interior and exterior use.
When floors are wet from rain, liquid spills and splashes, routine cleaning or water tracking from outside, GripTreat anti-slip treatment is activated and immediately makes those surfaces skid and slip-resistant.
- Quick return to service
- Increases coefficient of friction
- Interior and exterior use
- Easy to use
- Long-lasting results
- Does not affect appearance
- Low odor
Significantly improving the slip resistance of: –
- Ceramic and Porcelain tiles
- Granite and Marble
- Quarry Tiles
- Concrete and Natural Stone
- Shower tile floors
- Locker rooms floors
- Lobby and Entranceways
- Pool Decks
- Restaurant and Kitchen floors
GripTreat contains a blend of mild acids. Use rubber gloves and safety goggles. When using a pressure sprayer for application, avoid breathing the mist or getting the spray on yourself. Although GripTreat contains only mild acids it may discolor metal fixtures and shower panel tracks. These should be protected with blue tape or with a drop cloth.
GripTreat is Ready to Use. Clean the surface thoroughly using SurfaceClean to remove all dirt, grease and debris. Always test product in an inconspicuous area before applying.
Apply using an applicator, soft brush, mop or low-pressure sprayer. Caution use a spray device that will not create heavy misting or overspray. Make sure GripTreat is spread evenly across the entire surface to be treated. Do not pour directly on the surface. It may be necessary to divide large areas into smaller sections for effective application.
After GripTreat has been evenly distributed, agitate the solution for 1 minute using soft scrub brush to create a soapy surface. After waiting 2 minutes brush the entire surface again. The reaction should be discontinued by flushing the surface thoroughly, with SurfaceClean. After 8 minutes in the case on tile and after 10 minutes in the case of stone surfaces.
1 Gallon of GripTreat will cover approximately 400 to – 600 sq. ft. depending upon porosity of surface.
1 Gallon, 1 Quart
|Cleaners and Accessories||
CERAMIC, CONCRETE, PORCELAIN
Cleaning Tile and Stone
BRICK & MORTAR, CERAMIC, CONCRETE, PAVERS, PORCELAIN, SALTILLO/ TERRA COTTA