CoverShield E400 WB 

CoverShield E400 WB is a two component, abrasion resistant low odor, water-based epoxy coating for use with concrete, wood or masonry. The coating exhibits excellent characteristics that rival solvent based products.  E400WB has superb chemical resistance, abrasion resistance, and surface penetration.This product can withstand exposure to many common solvents and chemicals.


  • Low VOC
  • Virtually no odor
  • Can be used on “Green Concrete” (<28 days old)
  • Primerless
  • Can be applied by roller, brush or spray
  • Chemical resistance
  • Abrasion resistant

Main Uses

  • Showrooms
  • Warehouses
  • Hospitals
  • Food preparation areas
  • Pharmaceutical plants
  • Food and beverage facilities
  • Airplane hangers

Test Data

Property Typical Results
VOC content 120 g/l
Bond to concrete ASTM C882 >300 psi
Flexibility No cracks on 1/8” mandrel
Abrasion resistance ASTM D4060 CS-17 wheel/500 cycles 54 mg loss with 1000 gm load
Impact resistance MIL D3134 Passes

Application Properties

Pot life 45 minutes at 77oF (25oC)
Tack free 5 hour at 77oF (25oC)
Hard cure 48 hours at 77oF (25oC)
Recoat window 5 to 24 hours at 77oF (25oC)


Standard: light grey, battle ship grey, beige, tile red, light blue. Other colors available on request subject to a minimum order.