CoverShield P650 FS – Polyaspartic Floor Coating For Concrete
$14.00 – $1,055.00
FREE Shipping on all orders above $20 in the continental US
Frequently Bought Together
UV resistant fast set polyaspartic coating
CoverShield P650 FS Polyaspartic Floor Coating
CoverShield P650 FS is a fast set two-component 85% solids aliphatic polyaspartic coating. It has a high gloss finish, excellent non-yellowing UV resistance and outstanding impact and abrasion resistance. It dries quickly for rapid return to service applications and for same-day application of multiple coats.
P650 FS has an Easy mix ratio of One-part resin to One-part catalysts by volume and can be used for interior or exterior applications.
Features
- Fast turn around
- Color and UV stable
- Hygienic seamless surface
- Excellent impact resistance
- Abrasion-resistant top coat
- Good chemical resistance
Main Uses
- Topcoat for UV stability
- Clear binder for color flakes and quartz
- Floors, internal and external
- Parking decks and driveways
- Garage floors and workshops
- Balconies and walkways
Surface Conditions
Grind concrete floors to CSP-3, vacuum dust, wipe down with denatured alcohol. If moisture is present floor may require the application of WaterStop Primer at a spread rate of 150-300 sq. ft. per gallon.
Mixing
Mix Ratio: 1A:1 B. Combine Part B and Part A in a mixing container. Thoroughly mix both parts with a slow-speed drill and mixing blade for a minimum of 2 minutes. One mixed product has approximately 15 minute Pot Life. Don’t mix more material than can be applied in 15 minutes.
Application
Apply in a single coat at the specified application rate (see above) thickness
When used as a standalone system, apply by brush, 3/8” (10mm) nap mohair roller, or HVLP spray. Two 6mil (0.15mm) coats are normally required. Allow the first coat to dry for a minimum of 1 hour minutes and a maximum of 4 hours before applying the finish coat.
When used over flakes or color quartz apply using a squeegee. Spread the material tight and then backroll with a 3/8” (10mm) nap mohair roller.
Coverage
180-260ft2per gallon depending on substrate and desired surface texture.
Dry Time
Tack free/foot traffic: 4-6 hrs.
Heavy foot traffic 24 hrs. Vehicular Traffic 48 hrs.
Top coat or recoat
Lightly sand the surface and wipe down with denatured alcohol or acetone before applying additional coats or finish coats.